If you are comparing solar quotes before the end of 2026, the installation date deserves as much attention as the headline price. Federal support for eligible solar panels and batteries steps down on 1 January 2027. That can mean a smaller upfront discount even when the equipment and installation scope stay the same.
This guide explains current advertised prices, what changes at year end and how to compare systems for a home in Queensland or Western Australia. A lower rebate does not guarantee that every installer’s price will rise by the same amount: equipment costs, promotions and site requirements also affect the final quote.
Current Solar Prices by System Size
Smart House Solar’s current campaign advertises the following starting prices. These are specific promotional offers, not national averages or fixed prices for every property.
| Solar panel capacity | Advertised starting price | Where to start |
|---|---|---|
| 5 kW | Request a quote | Smaller roofs or modest daytime demand |
| 6.6 kW | From $3,491* | Homes with moderate daytime use |
| 10.5 kW | From $5,491* | Larger daytime loads or future EV charging |
| 13.2 kW | Request a quote | Higher demand and sufficient suitable roof space |
| 20–50 kW | Site-specific quote | Businesses and larger properties |
*Offers checked on 20 November 2026. Final pricing is subject to eligibility, location, site suitability, installation requirements and campaign terms. Ask for a written quote confirming GST, installation inclusions and the STC discount already applied. Do not subtract the rebate examples below again from a price that already includes that discount.
For wider context, Solar Choice’s November 2026 national index lists average installed prices of $5,560 for 5 kW and $9,830 for 10 kW, including GST and the STC discount. Its 10 kW averages are $9,350 in Brisbane and $8,410 in Perth. These benchmarks cover different installer offers and specifications; they are not direct equivalents of the Smart House Solar packages.
If you are comparing a 6.6 kW solar system with a larger package, check both the total panel capacity and inverter rating. A 10.5 kW offer is different from an exact 10 kW system, so compare the product models, capacity and warranties shown on each quote.
What Changes to the Solar Rebate in January 2027
Eligible solar PV installations use a five-year STC deeming period in 2026 and a four-year period in 2027. This means roughly 20% fewer certificates for the same system and location before rounding. It does not mean a 20% rise in the total installed price.
STCs are Small-scale Technology Certificates. Many customers assign the right to create them to a registered agent in return for an upfront discount. The amount credited depends on the certificate value agreed in the contract; it is not a universal fixed cash rebate.
Illustrative Rebate Values for Brisbane and Perth
The calculations below use Zone 3’s rating of 1.382, which applies to Brisbane and Perth postcodes, and an assumed value of $38 per STC. Check your exact postcode: not all Queensland or WA addresses use the same zone. Counts are rounded down to whole certificates. Dollar figures are illustrations, not guaranteed discounts.
| Panel capacity | Installed in 2026 | Installed in 2027 | Discount reduction |
|---|---|---|---|
| 5 kW | 34 STCs / $1,292 | 27 STCs / $1,026 | $266 |
| 6.6 kW | 45 STCs / $1,710 | 36 STCs / $1,368 | $342 |
| 10 kW | 69 STCs / $2,622 | 55 STCs / $2,090 | $532 |
| 10.5 kW | 72 STCs / $2,736 | 58 STCs / $2,204 | $532 |
| 13.2 kW | 91 STCs / $3,458 | 72 STCs / $2,736 | $722 |
Calculation: panel capacity × postcode zone rating × deeming years, rounded down, then multiplied by the assumed STC value. These calculations isolate the rebate change and assume the same certificate value in both years. The actual assignment price, fees and quote terms may differ.
For a 6.6 kW system in this example, the rebate falls by $342. If all other costs stayed unchanged and the full difference were passed on, the customer would pay $342 more. This is a pricing scenario, not a published 2027 offer.
Booking Before December Ends Is Not Enough
A deposit or signed quote alone does not establish a 2026 installation date. Solar PV eligibility starts when the system can first produce and deliver electricity at the premises. Ask your installer to confirm the expected completion date and what happens to the price if work moves into 2027.
Arrange a site assessment early enough to allow for approvals, equipment availability and any electrical upgrades. A quote should distinguish an estimated installation window from a guaranteed completion date. Our solar rebate guide explains how eligibility and installation timing affect the discount available to your home.
Adding a Battery Before the Rebate Changes
Smart House Solar’s current campaign also advertises a 14 kWh battery from $3,999*. Request a quote confirming the model, usable capacity, inverter requirements and rebates included. A battery-only offer is not a complete solar-and-battery package price.
Battery support has its own timetable. The factor is 6.8 STCs per eligible kWh for May–December 2026, falling to 5.7 for January–June 2027 and 5.2 for July–December 2027. The first 14 kWh of usable capacity receives the full factor, the next 14 kWh receives 60% and capacity above 28 kWh up to 50 kWh receives 15%.
Illustrative Battery Rebate Comparison
| Usable capacity | May–Dec 2026 | Jan–Jun 2027 | Discount reduction |
|---|---|---|---|
| 14 kWh | 95 STCs / $3,610 | 79 STCs / $3,002 | $608 |
| 28 kWh | 152 STCs / $5,776 | 127 STCs / $4,826 | $950 |
Examples use $38 per STC and whole-certificate rounding after applying the capacity tiers. They assume exactly 14 or 28 kWh of usable capacity; a product’s advertised nominal capacity can differ. They show federal support only and are not extra discounts to deduct from an already rebated offer.
For batteries, the applicable factor is tied to the date the installation is certified for compliance. Paying before year end does not lock in the earlier factor if certification occurs in 2027. Any separate state support must be checked against its own eligibility and participation conditions.
Size the battery around evening demand and the solar surplus available to charge it. A 28 kWh battery is not automatically the right match for a 6.6 kW array: daytime household use and winter generation may leave too little surplus to fill it regularly. Compare usable storage, charge and discharge power, backup capability and total installed cost.
Feed-in Tariffs and the Value of Using Your Solar
The upfront rebate reduces purchase cost. A feed-in tariff pays for eligible electricity exports after installation. Keep these two benefits separate when calculating savings.
Queensland
The QCA’s regulated regional feed-in tariff is 6.006 c/kWh for 2026–27, effective from 1 July 2026. South East Queensland retailers set their own offers, so check the tariff, daily supply charge, import rates and any export caps together.
Western Australia
The WA Government lists Synergy DEBS rates of 10 c/kWh for exports from 3 pm to 9 pm and 2 c/kWh at other times. Eligibility matters, especially when choosing a larger inverter; do not assume every system receives DEBS payments. Confirm the current offer with your retailer.
Using solar directly can avoid buying electricity at your usage rate. Battery savings must also allow for losses, battery cost and how often the stored energy is used. Neither option automatically eliminates electricity bills. Our feed-in tariffs guide can help you compare export payments alongside the other costs in your electricity plan.
What Can Change Your Final Installation Price
Roof access, shading, tile condition, multi-storey work, cable runs and switchboard upgrades can all change the scope of an installation. A larger array may also require a different inverter or network approval. Ask which items are included in the advertised price and which require an additional charge.
Compare exact panel and inverter models rather than brand names alone. For batteries, confirm whether the price includes a compatible inverter, backup circuits, metering and any installation work required at your property. Compare cash and finance totals separately.
Choose a System Around Your Electricity Use
Review 12 months of bills and, if available, interval usage data. Daytime demand, roof orientation, shading and future loads matter more than household size alone. A larger system can be worthwhile when you can use the extra generation, charge a suitable battery or support an EV. Export restrictions and low export payments can reduce the value of surplus generation.
Ask for a site-specific annual generation estimate and a savings calculation using your electricity plan. Average daily output will vary by season and should not be presented as a guaranteed daily result.
Check CEC product approval and the designer’s and installer’s relevant SAA accreditation. Products are approved; installers are accredited. Battery work also needs the appropriate battery endorsement and compliance with applicable installation standards.
Frequently Asked Questions
How Much Is a 6.6 kW Solar System Now?
Smart House Solar currently advertises a starting price of $3,491*. Your written quote confirms eligibility, equipment, installation scope and the discount applied. The offer is not a fixed price for every property.
Will Every Solar System Cost More in January 2027?
Not necessarily. The solar STC entitlement reduces, but suppliers may also change equipment prices or promotions. Compare the final installed price and inclusions rather than assuming the rebate reduction is the only price change.
Can I Claim Both Solar and Battery Support?
An installation can receive support for eligible solar PV and battery components, subject to each component meeting the rules. Ask for the two calculations to be shown separately. A battery added to existing solar does not generate a new rebate for the old panels.
Should I Install Before the End of 2026?
If the system suits your needs and can be completed within the relevant 2026 requirements, the higher support may improve the upfront price. Confirm timing in writing and allow time for a proper assessment. A suitable design and reliable installation remain essential.
Get a Quote Before the Year-End Change
Request a free, no-obligation quote from Smart House Solar to compare system sizes, product models, installation requirements and rebate calculations. Our team can check your property and discuss the available installation timeframe before you commit.
Final pricing is subject to eligibility, location, site suitability and installation requirements. T&Cs apply.



